Nothing but the Truth

Direct Code Entry

To program your universal remote to control your components

using the Direct Code Entry Method, follow the steps below.

1. Manually turn on the component

you want the remote to control.

2. Locate the enclosed Code Lists.

Find the list for the component you

wish to program. Find your

component's brand. You will see a

listing of four-digit codes for each

brand. If your brand isn't listed, use

one of the Code Search methods to

program the remote control. (Refer

to pages 7 and 9 for Manual and

Auto Code Search methods.)

3. Press and hold the component key

(TV, VCR*DVD, SAT*CBL) you

wishto program. The illuminated

ON*OFF key turns on and

remains on. If you release the

component key at any time

during the Direct Code Entry

procedure, the illuminated

ON*OFF key blinks four times,

and the process is exited.

4. While holding down the

component key, consult the Code

Lists for the four-digit code that

corresponds to your component's

brand and use the number keys

(0-9) on the keypad to enter it.

While you are pressing the

numbers, the illuminated

ON*OFF key turns off.

5. After the fourth number is

entered, the illuminated ON*OFF

key turns on. At this time, release

the component key. If the

illuminated ON*OFF key turns

off, you have entered a valid code

and have followed the correct

procedure for Direct Code Entry.

If you enter a code number that is not

in the Code Lists or you do not follow

all of the