To Insure That Blu-Rays Plays in the Ps3

To Insure That Blu-rays Plays In The PS3

First, check the main power switch on the system. If the switch is off, well cut it on.

If that don’t work, then check the AC power cords. Make sure you have it plugged

In (retard). Okay if your done sexually assaulting the back in of Ms.PS3, now you

can move to your next victim, Ms.TV. now if you are not getting an picture on your

TV screen check that the input mode of the TV is appropriate for the connector in

use on the system.

There may be a problem with the AV cable in use. Try using another cable that is

compatible with the PS3 system.(Be like me and use the PS2 or the PS1 AV

cords). If the video output settings on the system do not match those of the cable

or TV in use, there may be no picture. Or if the screen goes black, turn of the

system.

Then, with only the system and the TV connected, touch the system’s power

button for more than five seconds to turn the system back on. The video output settings will automatically be reset to the standard resolution. But if the resolution

of the video content is not supported by the TV in use, when the video is played

the screen may go blank. If this happens, go to the screen for selecting the

resolution in the system’s video output settings, select “Custom”, and then select

all the resolutions that are supported by the TV.

Or when outputting DVD content or Playstation3 format software in SD resolution,